Water In Fuel Monitors
The EASZ-2 is not a typical moisture sensor. It is fast response and not limited in it’s measurement range when using the FR version. It can measure both gradual moisture increases and also the presence of free water in real time. Operators will know the condition of their oil 24/7 and whether an event has occurred, e.g., a sudden increase in water droplets in the fuel. It can also detect an empty pipe condition.
How does water get into fuel?
- Poor quality suppliers
- Condensation – temperature changes
- Leaks in a system
- Atmospheric humidity
- Unprotected vents
- Seal wear and tear
- Seal failure
- Contaminated bearings
- Spot sampling failures/reliance on individuals to take proper samples
- System design errors
Response time 1 Second
Measurement of total water in any form whether dissolved, free, or emulsified
Temperature Compensation
Flexible range
Monitors fluid condition of operating equipment or oil product contamination level.
Inline full-bore or Insertion type
Auto Zero function
Ex Approval ATEX, IECEx and QPS for Hazardous Area
Truck Loading/Unloading
Automatic Well Testing(AWT)
Lease Automatic Custody Transfer(LACT)
Basic Sedim ent & Water(BS&W)
Lube Oil Monitoring
Separator Systems
Marine Industry
Power Plants
Pharmaceutical
Gear Oil
- Operating Principle : “L” System “ADC – Advance Digital Capacitance” / “F” System “LC-Oscillator + Resistance”
- Supply Voltage: 11…28 V DC
- Power Consumption: 1.0 Watt
- Output/Digital Protocol: Analogue: 4…20mA (Selectable Active or Passive), Digital: RS485, Modbus, Binary: Open Collector
- Setup and Calibration:
EASZ-2 GUI Software for Windows®
Connection Via USB-RS485 Comm. Cable or Optional: Bluetooth
- Typical accuracy and resolution:
Measuring range 0…1% 0…20% 0…60%
Accuracy ± 0.01 ± 0.05 ± 0.50
Elec. Resolution 0.003 0.008 0.050
*higher water in oil ranges available up to 100%, consult EESIFLO with your process information.
- Electronic Enclosure:
Die-Cast Aluminium Powder Coated, IP66
Optional: Stainless Steel 316L, IP66 (Suitable for Offshore and Erosive environment)
- Ambient Temperature: -20°C…60°C (-4°F…140°F)
- Response Time: 500ms nominal (no averaging applied)
- Start-Up Time: <10 Seconds
- Display: Field Type Integral Compact Version
- Process Temperature:
Up to 90°C (194°F)
Higher Temperatures consult EESIFLO.
- Typical Process Pressure: Up to 250 Bar (3,600 Psi)
- Connection Size:
In-line Flow-thru: DN25…DN600 (1” Inch…24” Inch)
Insertion Type: DN50 or DN80 (2” Inch or 3” Inch)
- Process Connection: NPT, BSP, ANSI, PN and others upon request
- Body & Sensing Element Construction Material:
Fully Stainless Steel 316/316L (Standard), NACE Compliant.
Optional: Duplex, Monel or Hastelloy
- Seals and Spacers: Teflon and Polyether Ketone (PEEK)
- Installation: Inline, bypass or Insertion
- Approvals:
Intrinsic Safe (IS) or Flameproof Ex “d”
ATEX, IECEx or cQPSus (UL, FM, CSA Standards)
CE Mark
Pressure Equipment Directive (PED)
