The S100 series is a basic cost-effective dust monitor to give an indication of changes in dust levels from the gas flow. This robust and sensitive monitor can be used in duct sizes with a diameter of less than 1 meter. The S100 is a real-time continuous dust monitor and will monitor for leaking or broken filters.
How?
The high-performance dust detector has several key features.
It can detect any particulates in the air-flow, offering a very fast response to any dust leaks.
The S101 variant includes two relays to indicate dust alarms, while the S103 version comes with an active and isolated 4…20 mA output.
Detects any particulates in the air-flow
Very fast response to any dust leaks
S101 comes with two relays to indicate dust alarms
S103 comes with an active and isolated 4…20 mA output
Rugged, IP66 rated design for harsh industrial conditions
Visible Green, Yellow and Red LED to indicate dust levels
Easy start-up and commissioning due to Self teaching Auto Setup function
Selectable FAST, MEDIUM and SLOW response models
Measured: objects Solid particles in gas flow
Measurement principle: Inductive Electrification
Measurement range: Detection limit 0,01 mg/m3
Max. range up to several g/m3 depending on operating conditions
Ingress protection: IP66
Power supply: 24 V DC ±10 %
Power consumption: 1 W
Output signals: S101: 2 × adjustable solid-state relays, max. 30 V DC / 200 mA
S103: Active and isolated 4…20 mA output
Communication interface: RS-485
Communication protocol:
• Modbus RTU
• Sintrol network
Physical characteristics:
Enclosure: Aluminium
Probe lenght: 250 mm. (9,84 in), can be shortened by the user
Wetted parts:
• Probe: Stainless steel (316L)
• Insulation: Polyether ether ketone (PEEK)
Weight: 0,7 kg (1.54 lb)
Ambient conditions:
Temperature: −40 … 60 °C (−40 … 140 °F)
Humidity: Max. 90 % relative humidity (non-condensing)
Process conditions:
Temperature: Max. 250 °C (482 °F)
Pressure: Max. 200 kPa (29 psi)
Flow speed: Min. 3 m/s (9.84 ft/s)
