Mentor Fixed Internal Mount Refrigerant Identifier
For Easy Automotive AC System Refrigerant Service
The Mentor Automotive Refrigerant Identifier utilizes state-of-the-art NDIR (Non-Dispersive Infrared) technology for the identification of refrigerant gases in automotive air-conditioning systems. The Mentor has been developed with over 30 years of experience in the design and production of safety critical gas analysis systems recognized globally as the best in the market for accuracy and quality.
The Mentor refrigerant identifier plays an important role in helping to protect automotive air conditioning systems and service and recovery equipment from potential damage caused by the potential, and unknowing use of illegal refrigerants. The recovery of contaminated refrigerant can damage expensive service and recovery equipment, potentially leading to expensive repair bills or even scrappage. Mentor will prevent contamination of your refrigerant supply from illegal contaminants from refrigerant cylinders and customer vehicles, therefore stopping cross contamination of other vehicles with these illegal contaminants.
- One identifier accurately analyses both R-134a and R-123yf for purity
- Identifies R1234yf, R134a, R12, R22, HC and Air as contaminates
- SAE J2927 Certified
- PC Software allows for simple setting to VDA or SAE mode
- Five year oxygen sensor
- Minimal loss of refrigerant during tests
- USB or RS232 communications
- Replaceable Oil Contamination indicator in front panel
- Data format either SAE J2912 or Pass/Fail selectable via PC application
- Supplied with a sintered oil restrictor in a brass housing
- Bespoke PC Software Application allows manufacturers to test, calibrate and configure the identifiers during the production process
- For use with certified SAE J2843 or SAE J2851 Automotive AC Service equipment
| Refrigerants and other vapours identified | R1234yf and R134a |
| Sample Type | Vapour only |
| Sample Weight | Less than 5 grams per test |
| Operating temperature range | +10 °C to +49°C |
| Sensor Type | NDIR – Non-dispersive Infrared |
| Sensor stabilisation time | 2 minutes after power on |
| Expected air sensor lifetime | 5 years |
| Test Cycle time (purge + test) | Typically, 140 seconds |
| Communication portal | USB 3.0 |
| Printer Communication | USB 3.0 and RS232 |
| Stored test results capability | 5 tests |
| Weight | 0.6 kg / 1.3 lb |
| Approvals | SAE J2927, UL61010, CE, EMC |
